Lifting Weight: 660LBS (Single-line) or 1320LBS (Double-line)
Lifting Speed: 32.8FT/min(Single-line) or 16.4FT/min(Double-line)
Lift Height: 39FT(Single Cable Lifting Speed) or 19.5FT(Double Cable Lifting Speed)
Mains Voltage: 120V/60Hz
Input Power: 1050W
Zinc-plated Anti-rotate Steel Wire.
GENERAL SAFETY RULES:
WARNING! Carefully read the safety rules listed below.
1. Your sockets must comply with safety rules.In case your sockets are not suitable, they should be checked by a skilled electrician.
2. Your socket plug must absolutely be grounded and your electric system must be supplied with a magneto cut-out safety.
3. Ensure that the machine is out of reach of children.
4. Do not pull the electric cable to disconnect the plug.
5. The machine shall be protected from frost and low temperatures.
6. In case the machine cannot hoist a load, do not keep pressing the hoisting push-button: this means that the load exceeds the machine maximum capacity.
7. The machine shall not be disassembled when running or connected to power.
8. Do not stand under hoisted weights.
9. Before starting the work, make sure that the steel cable is correctly winded around the reel and the pitch is equal to the cable diameter.
MAINTENANCE AND CLEANING:
Before any work on the machine itself, pull the mains plug.
Keep the machine and the ventilation slots clean.
1. Periodically CHECK that the steel cable is in good conditions.
2. CHECK that the screws securing the brackets and reduction gear are well tightened.
3. CHECK THE CONDITIONS AND TIGHTENING OF THE NUTS securing the steel cable clamps.
4. Periodically CHECK that motor stop switch and push button switch are in good operating conditions.
1 X 1320LBS Electric Hoist
1 X 6.6'x3" FREE Lift Sling Strap (Free)
1 X Instructions
Specification: Horsepower: 0.68 HP; Load Capacity: 660LBS (Single-line) or 1320LBS (Double-line); Lifting Speed: 32.8FT/min(Single-line), 16.4FT/min(Double-line); Cable Diameter: 0.17inch; Lift Height of 39FT of Single Cable Lifting Speed, 19.5FT of Double Cable Lifting Speed; Lenght of power supply cord: 2.4 FT; Lenght of remote control cord: 5 FT (110V~120V/980W/8.2A/60Hz); Input Power: 1050W.